Check-Mate


 

Typicical Fluid Handled
  •  Casco S40 Professional
  • Adhesive
President 20:1
Presure-
balanced
pumps for
uniform
dispensing
and minimal
beed
distartion

 

Technical Specifications

Max. fluid pressure ....................... 4140 psi (28.5 Wa, 285 bar)

Max. air input pressure ...................180 psi (1.25 Wa, 12.5 bar)

Air inlet size (bare pump) .................................. 3/8 npt (f)

Fluid flow at 60 cpm ............................. 0.5 gprn (1.9 ]/min)

Fluid outiet size ............................................. 1/2 npt(m)

Packings:

Throat ........... ...................................... UHNMPE/Teflon

Piston (CS) .. .................................................. UHMWPE

Piston (SS1) ....................................................... Teflon

Rod and cylinder .................... Severe Duty (chrome over SST)

Other wetted parts

Carbon steel .............................. CS, alloy steel, ductile iron,
  
                                     304, 316 and 17-4 PH SST, zine plating
                                                            Teflon, Deirin", UHMWPE

Stainless steel ............................... 304, 316 and 17-4 PH SST,
                                                            Teflon, Delrin, UHMWPE

Overall length (bare pump) ............................ 45 in. (115 cm)

Weight (pump only) ..................................... 43 Ibs (19.5 kg)

Instruction manual

Carbon steel ...................................................... 308-080

Stainless steel .................................................... 308-200

 

     
Copyright 2000 JTJ Maskinservice. Alle rettigheder forbeholdes.
Senest opdateret: maj 11, 2004